HTD5M 300 mm Timing Belt 15 mm Wide
Timing Belts
HTD5M 300 mm Timing Belt 15 mm Wide
Model: HTD5M-300-15
HTD5M 300 mm Timing Belt 15 mm Wide (model HTD5M-300-15) from the KEDI Timing Belts range, Gear, Rack & Synchronous Drive Series. Standard sizes ship quickly; material, heat treatment, bore and finish can be customised to drawing.
- Pitch5 mm
- Pitch Length300 mm
- Width15 mm
- Teeth60
- ProfileHTD5M
Specifications & dimensions
| Pitch | 5 mm |
| Pitch Length | 300 mm |
| Width | 15 mm |
| Teeth | 60 |
Technical parameters
| Profile | HTD5M |
Values are nominal; final dimensions are confirmed against the approved drawing.
CAD / technical drawings
2D/3D drawings (PDF, DWG, STEP) for this model are available on request.
Request drawingPerformance features
- Trapezoidal and curvilinear tooth profiles
- Multiple pitch lengths and widths
- Neoprene/rubber and polyurethane options
- Steel or aramid tensile-cord options depending design
Application scenarios
- Automation
- Packaging
- Printers and textile equipment
- Machine tools
Industries served
CNC machine toolsIndustrial automationGate & door automationPrinting & packagingGreenhouse & agriculture
Product description
Synchronous timing belts for accurate speed ratio and positioning without the slip associated with friction belt drives. This page is prepared for model identification, preliminary selection and quotation. The exact production configuration should be confirmed before order placement.
About this model
HTD5M 300 mm Timing Belt 15 mm Wide (model HTD5M-300-15) is a standard item in the KEDI Timing Belts range, with Pitch 5 mm; Pitch Length 300 mm; Width 15 mm; Teeth 60. It is produced to drawing and standard, inspected for dimensions and hardness before shipment, and can be supplied alone or as a matched set with mating transmission parts. Material, heat treatment, bore and surface finish can be adapted to the application.
Material & process
| Material | C45 / S45C carbon steel, 42CrMo alloy steel, stainless steel; cast iron or aluminium for pulleys; nylon for light-duty racks |
| Heat treatment | Quenching and tempering, induction hardening of teeth, carburising for high-load gears |
| Tooth finish | Hobbed or milled standard; shaved or ground for higher accuracy grades |
| Surface | Black oxide, zinc plating, phosphating or natural finish with anti-rust oil |
| Custom options | Bore and keyway, set-screw holes, hub length, helix hand, mounting holes and lengths to drawing |
Quality control
- Tooth profile, pitch and runout checked on CMM for precision parts
- Hardness verified after heat treatment
- Bore, keyway and hole positions checked with gauges
- Cumulative pitch error and straightness checked on precision racks
How to select
- Define module (or pitch), pressure angle and helix angle to match the mating part.
- Check transmitted torque and speed to choose material and heat treatment.
- Select accuracy grade by positioning and noise requirements.
- Specify bore, keyway and mounting holes, or send the shaft and mounting drawing.
- For racks, state total travel so joint positions and segment lengths can be planned.
Ordering & packing
- For a quotation, send: model HTD5M-300-15, quantity and delivery destination
- For custom versions: drawing or sample, material, heat treatment and finish
- Packing: anti-rust oil, moisture-proof wrap, carton or wooden case; labels on request
- Lead time: confirmed with the quotation for standard sizes, and after drawing review for custom parts
Frequently asked questions
Can you make gears to my drawing?
Yes. Send a 2D/3D drawing or a sample; module, tooth count, bore and material can all be customised.
Do helical racks need a matching pinion?
Yes. The pinion must have the same module and helix angle with the opposite hand; we supply both as a matched set.
How are long racks joined?
Racks are machined with matched end pitch so segments can be joined continuously using a joining gauge.
Timing Belts
Related models
Model AT10-600-16
AT10 600 mm Timing Belt 16 mm Wide
- Pitch10 mm
- Pitch Length600 mm
- Width16 mm
Model HTD14M-1120-40
HTD14M 1120 mm Timing Belt 40 mm Wide
- Pitch14 mm
- Pitch Length1120 mm
- Width40 mm
Model H-1016-19.1
H 1016 mm Timing Belt 19.1 mm Wide
- Pitch12.7 mm
- Pitch Length1016 mm
- Width19.1 mm
Model L-762-12.7
L 762 mm Timing Belt 12.7 mm Wide
- Pitch9.525 mm
- Pitch Length762 mm
- Width12.7 mm
Have a drawing, sample or model number?
Send it to our engineering team — we confirm the specification and reply with a quotation.